
3/4" Hose end battery operated timer with female hose thread inlet and male hose thread outlet, connects to a faucet or hose end.
product info & downloadsThis drip kit is designed to water landscape areas with shrubs, trees, vines, and flower-beds. It can cover up to 150 sq. ft. using our 1 and 4 GPH PC drippers with option to expand. It contains twenty #30, 1 GPH and two #34, 4 GPH PC drippers. The kit also contains 50' of 1/2" poly tubing, 50' of 1/4" micro tubing, swivel adapters, 1/2" and 1/4" tees, coupling, barbs, 1/2" and 1/4" stakes, hose ends, punch, 1/4" shut off valve, and plugs. (If pressure in your system exceeds 30 PSI, add a #4, pressure regulator for hose thread and #5 for pipe thread.)
product info & downloadsThe FS50 contains everything needed to install a complete system that will water up to 22 plants. Two foggers are a part of this kit, which are ideal for misting orchids or hanging baskets. The nice part about installing a drip system is that it is simple, not even requiring any special tools, or glues. All the parts are included to put together a complete low-volume irrigation in this one simple kit from DIG, and when you're done you won't even have to worry about turning the system on. The controller will take care of that for you!
product info & downloadsThis adjustable micro sprayer kit is a complete system that can be used for watering under the canopy of ground-covers, flower-beds and shrubs. It can water up to 160 sq. ft. or it can water a narrow border, with the option to expand up to 320 sq. ft. It contains two #47, 90° micro sprayers, four #48, 180° micro sprayers on adjustable flow stake risers and two #101, 360° adjustable sprayers. The kit also contains 50' of 1/2" poly tubing, seven 2' pieces of 1/4" micro tubing with 1/4" barb, back-flow device, pressure regulator, swivel adapters, 1/2" tee, punch, 1/4" barbs, two 3- 1/2" holder stakes, hose end and plugs.
product info & downloadsEarthline Brown PC™ Dripline is a drip hose that contains pressure compensating (PC) drippers inserted into the extruded interior wall of the tubing at 18" intervals. Each of the drippers consists of a cylinder with a labyrinthine water passage, filter and diaphragm. The diaphragm inside our PC in-line dripper continuously adjusts to varying water pressure, ensuring a constant flow rate. It also allows particles to pass through the dripper without harming it, providing reliable performance and a longer life. This dripper design, with a wider flow path, allows the dripper to operate at optimal flow rates under extreme conditions.
product info & downloadsLow flow drippers which allow water to flow smoothly, without turbulence, as the water slows in velocity. The drippers may be twisted open for cleaning. The drippers provide the suggested flow rate at a pressure no higher then 25 PSI. The drippers have a 1/4" barb inlet and outlet. Available in packs of 5, 25, and 100.
product info & downloads